Having a leaking roof is really annoying. It could result in water damage to your walls and ceilings, roof sheathing and rotting rafters, or mold in your home insulation. Something that begins as a minimal issue, such as a roof leak, could result in major damage and a lot of headaches. It’s quite infuriating to determine what’s wrong, especially since the areas where you can observe signs of leakage typically aren’t compatible with the actual source of the leak. Now, what are the typical areas you have to check whether you have roof leaks?
If you experience a cold-weather climate, then ice dams are one of your problems. An ice dam occurs once your warm attic melts the winter snot on your roof. The melted snow eventually trickles down towards the attics, which freezes over time that can back up under the flashings and shingles.
Another weak spot your roof could have is your chimney because water could pool surrounding it. Also, the pooled water might find several ways to get into your house, and small flaws could result in trickles. Moreover, the flashing near your chimney is one of the typical areas of failure that frequently causes leaks related to a chimney.
Skylights are amazing especially if they effectively do what they are supposed to do, which is to allow sunlight. However, once they allow rain and moisture in, skylights are not that great. Sadly, leaky skylights are quite typical. Hence, if you own one, make sure to check on it because it might be the major source of your leaking roof.
Some leaks appear to be coming from the roof, but they actually aren’t! As you are inspecting your roof while detecting its source, never overlook to check near the corner boards, windows, and siding for holes, damage, and cracks.
One of the possible reasons why leaks happen is due to the holes retained after an antenna or dish was attached to your roof.
This indicates the thin mental sheet that conceals your roof’s transition points. Such points are most prone to leaking. Because of that, flashings are utilized in the first place. Indeed, once the flashing eventually gets damaged or corroded, that’s when it halts to do its purpose and you begin to see some forming leaks.
Similar to exhaust flue, plumbing vents, or any kind of vent found in your roofing is an area where leaks can possibly be created. Never forget to inspect the nails, the base, and the rubber boot. Search for any signs of broken seams and cracked housing in your vent.
When it comes to leaks, a plumbing vent pipe is a typical reason behind it. Usually, the vent’s rubber boot will be torn or worn, some of the nails will be missing or loose, or the plastic/metal base would have broken seam or crack. If you can observe some of these presented problems, water can more likely reach into your roof through the pipe.
Contact the best roofing company in Caen now if you’re experiencing one of the aforementioned roofing problems.